|
Standard Error Codes For
Lexmark Printers |
| 10 Cover Open |
Printer is open or no toner cartridge |
| 20 Paper Jam |
Paper jam in the input area |
| 21 Paper Jam |
Paper jam in the area under the toner
cartridge |
| 21 Paper Out |
Paper out or feed failure |
| 22 Paper Jam |
Paper jam in the fuser or exit sensor
section of the printer |
| 23 Short Paper |
Replace paper with proper size |
| 23 Paper Jam |
Paper jammed in duplexer |
| 24 Feed Failure |
User attempted to feed through the
manual feed port while the printer was feeding from an installed paper or
envelope source |
| 24 Short Paper |
Replace paper with that of proper
length |
| 26 Wrong Paper Size |
Paper jam caused by using the wrong
paper size |
| 27 Change Paper |
Automatic paper sensing has determined
that the paper installed is not the size requested |
| 28 Load Paper |
There is no paper or a feed failure at
the pickup |
| 29 Output Bin Full |
Remove paper from the output bin, if
that doesn't work power off the printer |
| 30 Top Cover Open |
A cover that is not shut or a
cartridge is not properly seated or missing |
| 31 Change Paper |
Wrong size paper installed |
| 32 Wrong Print Cartridge Installed |
Installed print cartridge is not
supported by the printer |
| 36 Load Paper |
Sensor has indicated that either the
tray is empty or there's a feed failure |
| 37 Insufficient Collation Memory |
Not enough memory installed in the
printer to compete the job |
| 38 Memory Full |
More memory may be required |
| 39 Complex Page |
Page is too complex to print |
| 40 Default Storage Error |
A printer function error |
| 41 Requested Font Missing |
User has requested a font that is
not in memory |
| 43 Font Card Not Supported |
The installed font card is not
supported by the printer |
| 51 Defective Flash |
Error has occurred in a flash simm |
